Let's Talk Leather

Leather is the strongest, most durable and practical upholstery covering and will outlast fabric four to five times.



How Leather Is Created:
From Hide to Leather:
After cleaning and conditioning, hides are sorted according to quality. Because leather furniture requires large unblemished hides, it is the most expensive upholstery covering per square foot. The outside surface of the hide is cut away from the rest and reduced by a series of rollers to a thickness between 0.9 and 1.4mm. Because the cells are closer together in this layer, it's the strongest, most supple and durable part of the hide. The layer below - called the split - is thicker and stiffer but not as strong.

Types of Leather:
Real Leather, Fake Leather & The Stuff In-Between:
Top Grain Leather: - The outer layer - or top grain - is the most desirable for furniture. Nature adds its share of markings, often requiring sanding, protein injection treatments to retain suppleness and a protective coating. This process - called correction - adds heat and light protection and makes it more resistant to spills. The more correction, the lower the quality. Those top grain hides requiring no correction, the rarest and most expensive are called full grain or full top grain. These premium leathers are incredibly comfortable because the leather can breathe. However, they are susceptible to staining and marking.
Bi-Cast Leather: - Made from the split hide below the top grain, it's vinyl coated to resit cracking, splitting and peeling. While this helps, it doesn't come near matching the durability and fell of top grain leather.
Bonded Leather: - The leather equivalent of particleboard, it contains only about 17% leather in the backing. What looks like leather is actually vinyl.

Dye & Protective Coatings:
Full Aniline Dye: - Hides are immersed in a transparent aniline dye allowing the natural markings to show through then rotated on drums until the dye completely penetrates from front to back. No protective coat is applied making the most luxurious of leathers. Generally reserved for premium leathers, it's also the reason they're so vulnerable to stains. As it is a natural product, variations throughout the grain will be seen on the final product.

Semi-Aniline Dye: - Used on corrected leathers. Despite the name, hides are dyed through but then a layer of pigment is sprayed on top to even out variations. A thin coat of lacquer seals in the colour, resulting in leather that's almost as soft as premium leather, yet harder wearing and protected against fading and staining.

Surface Pigment: - Used only on the cheapest hides, primary bi-casts. The pigment sits on top and is sealed with lacquer resulting in stiffer surface. Easily identified because the back is not the same colour as the front. The raw hide will show through if nicked or scratched and is susceptible to cracking and splitting.

Quality leather isn't an expense, it's an investment that looks better the more you use it. There's a place for bi-cast and bonded leathers but it's a false economy to think they are cheaper. Top grain full and semi-aniline dyed leathers cost more up front but last longer, age well and hold their value better.
It's confusing out there. Terms like "All Leather" and "Top Grain Seating" can lead you to believe you're looking at a quality piece of furniture when it's just the opposite. If you know what you are looking for though, it makes it that much easier to ask the right questions.